Penataan Stasiun Kerja Industri Pelapisan Logam UD. Langgan Abadi Berdasarkan Prinsip 5R untuk Efisiensi Proses Kerja

Open Access
Article Info
Submitted: 2019-11-25
Published: 2020-06-12
Section: Articles
Language: EN
In Prosiding Seminar Nasional Kolaborasi Pengabdian Masyarakat UNDIP-UNNES 2019

One of the informal sector businesses that absorbs a lot of labor is electroplating or metal plating services. This sector has a high risk of accidents and illness due to a combination of labor and environmental factors. Epidemiological studies show that workers exposed to chromate production and Cr coating have 2-80 times the risk of lung cancer. That work places  requires optimization of work station layout. The purpose of rearranging work station layout based on the 5S principle to improve the productivity and work efficiency in the metal coating industry UD. Langgan abadi. This activity used an observation and  two way communication method that begun with a pretest and ended with a posttest. Participants in this activity were business owners and metal coating workers in Talang sub-district, Tegal district. After rearranging, the work station becomes neat, has adequate lighting and ventilation and also the work posture becomes ergonomic. Rearranging work stations based on the 5S principle can improve work efficiency and effectiveness which increases productivity.

Keywords— Work Station, 5S, efficiency, productivity

References

  1. Suma’mur. 2009. Hiegiene Perusahaan dan Keselamatan Kerja. Jakarta : CV Sagung Seto.
  2. Tresnaningsih, Erna, 1990. Ruang Lingkup Metode Kesehatan Kerja. Materi Pelatihan Upaya Kesehatan Kerja Sektor Informal di Indonesia. Direktorat Bina Peran Serta Masyarakat, Departemen Kesehatan R.I. Jakarta
  3. Holmes, J., Adams, J. W., & Hamilton, C. J. (2008). The relationship between visuospatial sketchpad capacity and children’smathematical skills.European Journal of Cognitive Psychology, 20, 272–289.
  4. Eastman Et Al. 2008. Concept Of BIM. Di dalam skripsi : Janni Tjell (Ed). Building Information Modeling (BIM) In Design Detailing With Focus On Interior Wall Systems, 2010. Denmark : 1-2
  5. Andriani, M., Dewiyana and Erfani, E. (2017) ‘Perancangan Ulang Egrek Yang Ergonomis Untuk Meningkatkan Produktivitas Pekerja Pada Saat Memanen Sawit’, 4(2), pp. 119–128.
  6. Os ada, T. (2004) Sikap Kerja 5S. Jakarta: PPM.
  7. Ra mdan, I. M. (2013) Higiene Industri. Yogyakarta: Bimotry Bulaksumur Visual.
  8. Rohman, S., Helianty, Y. and Yuniar (2014) ‘Evaluasi Penerapan Metode 5R dalam Peningkatan

  1. ida wahyuni  Diponegoro University, Indonesia